Q115DF - 15Amp Circuit Breaker

Q115DF - 15Amp Circuit Breaker

The Q115DF is a 15-amp, 1-pole plug-in circuit breaker with AFCI and GFCI protection built into a single unit. It's a Type QDF unit rated for 120 VAC with an interrupting rating of 10 kA. For an application that needs both arc-fault and ground-fault protection, this gives you those two functions along with standard overcurrent protection in a single device. The breaker is only 1 inch wide and measures 3.13 inches high by 2.5 inches deep. It's also HACR-rated and rated at 40°C. If you're replacing an existing breaker, the Q115DF part number is a good place to start, but don't stop there. Check the breaker type and electrical ratings, as well as compatibility with the equipment where it will be installed. Similar-looking breakers aren't automatically interchangeable.

Key Features and Benefits

• 15-amp, 1-pole breaker for compatible 120VAC applications
• AFCI protection for arc-fault circuit interruption
• GFCI protection for ground-fault circuit interruption
• Both AFCI and GFCI functions are provided in the same breaker
• 10kA A.I.C. rating at 120VAC
• Type QDF plug-in design
• Only 1 inch wide
• HACR-rated
• Rated at 40°C

Technical Specifications

• Part Number: Q115DF
  
• Type: QDF
  
• Poles: 1
  
• Amperes: 15A
  
• Voltage: 120VAC
  
• A.I.C. Rating: 10kA @ 120VAC
  
• Arc Fault Circuit Interruption: Yes
  
• Ground Fault Circuit Interruption: Yes
  
• Installation: Plug-In
  
• HACR Rated: Yes
  
• Temperature Rating: 40°C
  
• Height: 3.13 in.
  
• Width: 1.0 in.
  
• Depth: 2.5 in.
  

Material Compliance and Certifications

• The information available for the Q115DF indicates it is HACR-rated at 40 °C. The breaker also provides AFCI and GFCI functionality.
• We haven't listed additional material certifications or compliance claims because they weren't included in the available specifications. If a particular certification is required for your job, check the breaker markings and supporting product documentation before installation.

Where It Works Best

• The Q115DF is a good match for compatible 15A, 120VAC circuits that require both AFCI and GFCI protection. Since a single breaker handles both functions, there's no need to use separate devices to provide both types of protection.
• It's also useful when you're replacing an existing Q115DF or Type QDF breaker and need the same basic configuration: 15 amps, one pole, 120VAC, plug-in construction, and a 10kA interrupting rating.
• Before swapping breakers, check compatibility carefully. Same size and same amperage don't necessarily mean the same breaker. Confirm the panel or equipment requirements, breaker type, voltage, number of poles, and interrupting rating before installation. Electrical installation and servicing should be handled by qualified personnel and in accordance with applicable electrical codes.