Q130H - 30Amp Circuit Breaker

Q130H - 30Amp Circuit Breaker

The Q130H is a 30 amp, single-pole Type QPH circuit breaker with a plug-in design. It has an interrupting rating of 22 kA at 120 VAC and is HACR-rated. If you're replacing an existing Q130H, these are the details you'll want to compare with the breaker currently installed. Physical size matters too: the breaker measures 2.88 inches high, 1 inch wide, and 2.56 inches deep. Its 1-inch width keeps the footprint compact, while the 22kA A.I.C. rating makes it suitable for compatible applications requiring that level of interrupting capacity. The Q130H is also rated at 40°C. Before using it as a replacement, check the breaker type, amperage, number of poles, voltage, A.I.C. rating, and panel requirements. Matching the part number is a good starting point, but the electrical specifications should also match.

Key Features and Benefits

• 30-amp, 1-pole breaker for compatible electrical applications
• 22kA A.I.C. at 120VAC
• Type QPH configuration
• Plug-in design for compatible equipment
• Only 1 inch wide, helping keep panel space to a minimum
• HACR-rated for qualifying heating, air-conditioning, and refrigeration applications
• Rated at 40°C
• Clearly identified as part number Q130H, which helps when comparing a replacement with an existing breaker

Technical Specifications

• Part Number: Q130H
  
• Type: QPH
  
• Amperes: 30A
  
• Poles: 1
  
• A.I.C. Rating & Voltage: 22kA @ 120VAC
  
• Installation Type: Plug-In
  
• HACR Rated: Yes
  
• Temperature Rating: 40°C
  
• Height: 2.88 in.
  
• Width: 1.00 in.
  
• Depth: 2.56 in.
  

Material Compliance and Certifications

• The Q130H circuit breaker is HACR-rated and carries a 40°C rating. No additional material-compliance certifications were included in the supplied specifications, so they shouldn't be assumed.
• For installations where a particular certification or material standard is required, verify that requirement against the breaker markings and applicable manufacturer documentation.

Where It Works Best

• The Q130H makes sense when the equipment calls for a 30-amp, 1-pole Type QPH plug-in circuit breaker rated 22kA at 120VAC. Its specifications also make it suitable for qualifying HVAC, air-conditioning, heating, and refrigeration equipment, as the breaker is HACR-rated.
• For a replacement job, don't go by appearance alone. Two breakers can look very similar and still have different electrical ratings. Compare the existing breaker and equipment requirements with the Q130H part number, 30A rating, single-pole configuration, QPH type, 120VAC rating, 22kA interrupting rating, and plug-in design before installation.